From: Lars Hecking (lhecking@nmrc.ucc.ie)
Date: Tue Apr 27 2004 - 08:54:44 EDT
I have an Ultra 60 workstation with Creator 3D gfx, and I'm using it with
a 17" CTX PV700 at 1280x1024x76.
http://www.ctxintl.com/products/lcd_pv700_pv700b.htm
It works quite well, but there is one glitch: when I reboot the machine,
the screen needs to be plugged out (switching it off is not enough), and
plugged back in when the machine is up, otherwise the console comes back
at a lower resolution of 800x600.
Is there anything I can set on the Sun to prevent this? The framebuffer
is configured for 1280x1024x76, and the CTX does support it.
$ ffbconfig -prconf
--- Hardware Configuration for /dev/fbs/ffb0 ---
Type: double-buffered FFB2+ with Z-buffer
Board: rev 2 (Vertical)
PROM Information: @(#)ffb2p.fth 2.9 98/07/14
FBC: version 0x3241906d
DAC: Brooktree 9070, version 1 (Pac2)
3DRAM: Mitsubishi 130a, version 1
EDID Data: Not Available
Monitor Sense ID: 7 (Unknown monitor type, defaulting to Sun 19" monitor)
Monitor possible resolution: 1152x900x66
Current resolution setting: 1280x1024x76
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:32 EDT