From: Paul Porcelli (Paul.Porcelli@aggreko.co.uk)
Date: Fri Apr 23 2004 - 05:12:28 EDT
Hello folks,
I have just created a bootable DVD using the Instructions
in the Sun blueprint article:
http://www.sun.com/solutions/blueprints/0404/817-6991.html
I followed the procedure exactly as it says in the document
until the part where you burn the image onto a DVD.
In the document John Howard burns the image on the Solaris
server.
As we only have a local Intel attached DVD writer. I have
ftp'd the image to a windows box and then burned the image
to DVD using Roxio DVD Creator.
When I try and boot from the DVD I get the following error:
Bad magic number in disk label.
Is there something this process won't work by ftping and burning
on the Intel DVD or have I messed up earlier in the process ?
I have gone through the full image building/burning process twice
with the same lack of results.
Many thanks for any info/advice.
Paul
Visit us at http://www.aggreko.com
Confidentiality Notice: This communication and any accompanying attachments
contain confidential information intended for a specific individual and
purpose. This communication is private and protected by law. If you are not
the intended recipient, you are hereby respectfully notified that any
disclosures, copying, forwarding or distribution, or the taking of any action
based on the contents of this communication is strictly prohibited.
_____________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:31 EDT