From: neil quiogue (neil@quiogue.com)
Date: Thu Apr 22 2004 - 04:58:12 EDT
Hello,
It seems that the internal mapping (on how the OS sees the device) was
changed somehow. So what I did was the following:
1. Remove the Disk for Replacement option (vxdiskadm)
2. Placed the Disk in the control of VxVM (through vxdisksetup -i [device])
3. Replaced the failed or removed disk option (vxdiskadm)
4. Placed the volume online again (vxvol -o bg -f start [volume name])
And voila, I'm able to access the disk again.
Hope that helps someone.
Regards, Neil
----- Original Message -----
From: "neil quiogue" <neil@quiogue.com>
To: <sunmanagers@sunmanagers.org>
Sent: Thursday, April 22, 2004 12:19 AM
Subject: Help Regarding Veritas
> I'm having a dilemma wherein the Veritas VM is not able to see the T3
> properly but when I execute the format program, the Solaris box sees it.
> Whenever I powercycle the T3, the Solaris box sees the offline/online
status
> (through /var/adm/messages) also so what could possibly make this happen?
>
> On bootup, I see this strange information:
> Starting VxVM restore daemon...
> VxVM starting in boot mode...
> NOTICE: vxvm:vxdmp: added disk array 60020F20000048DA0000000000000000,
> datype = T3
>
> vxvm:vxconfigd: WARNING: Disk t3disk01 in group rootdg: Disk device not
> found
>
> Any tips would be appreciated.
>
> Regards, Neil
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:30 EDT