From: Brent Bailey (mrb@bmyster.com)
Date: Tue Apr 20 2004 - 16:44:07 EDT
First ..i want to than everyone who helped me :-)
My question was :
Im setting up a sunfire v440 w/ solaris 9 12/03 ...the machine didnt come
with a keyboard so i have done the install from the SC (service console)
and a laptop ...now that the system has been installed i want to apply the
recommended updates however ..the way i have done it in the past is
# init 6
then do "stop-a"
and do boot -s
then apply the patches...i dont have a sun keyboard so i cant do a stop-a..
is there a equivilent to the stop-a keystroke on a regular keyboard ?
THE ANSWER TO THIS WAS:
you need to send a break from the PC terminal. But
rather than init 6 (reboots) use init 0 (shutsdown to
the 'ok' prompt). Then you can boot -s
-- Brent Bailey _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:30 EDT