From: John BOSSERT (jbossert@unifiedsignal.com)
Date: Wed Apr 07 2004 - 23:14:05 EDT
I've a number of old Netra T1/105's that, after losing power, require
the power switch to be toggled to the "0" (off) state and then to the
"1" state in order to power them on. From the LOM prompt, neither
"poweron" or "reset" does the trick - I have to physically toggle the
switch off and then on, after which the machine boots normally.
I've looked through the LOM manual - nothing, autoboot?=true (though I
question its relevance.) Google is silent on the subject.
Thanks for any help,
-- John BOSSERT _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:25 EDT