From: Mike's List (mikelist@sky.net)
Date: Wed Apr 07 2004 - 09:39:03 EDT
I'm installing a new server, Solaris 9 4/04 with core installation,
with the following hardware controllers/config.
c0t0 - boot disk
c1t5 - HP DAT-24i (id5, term power jumper set on)
c1t6 - NEC CDROM (id6, term power jumper set on)
issue #1
--------
During installation I received the following error message:
(and after installation, during boot)
HPdds3 optons value invalid bits set: 0x4000
I believed I have all the jumpers set correctly on the HP DAT-24i,
according to HP user/installation guide. Is the above normal error
message and can be ignore or do I need to investigate the rest of the
SCSI devices within this controller?
There are two devices on this specific SCSI controller, HP DDS3 on
target 5, and NEC CDROM on target 6. I think there's a parity option
on the CDROM, but it's not set, not sure if this matter?
issue #2
--------
After installation (no patch installation or anything else added) I
can't seem to mount my Solaris CD 1/2 (as HSFS) to add some packages.
I can mount my Solaris CD 2/2 just fine (same command/syntax).
# mount -F hsfs /dev/dsk/c1t6d0s0 /cdrom
hsfs mount: /dev/dsk/c1t6d0s0 is not an hsfs file system.
I can boot with the CD 1/2 and do installation, and even burn another
CD 1/2 to make certain it's not the media, I just can't mount as HSFS.
solutions tried
---------------
I've searched the archive, and it's not a vold issue. I attempted to
mount different slice s0/s1/s2/etc. and still the same error message.
Looking forwards to some hints/solutions, thanks in advance.
- Mike
[ In addition to www.sunfreeware.com more packages at ftp.patriots.net ]
[ Furthermore, you can explore www.openpkg.org -- ease of management. ]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:25 EDT