SCSI-IDE Ultra10

From: Paramasivam, Meenakshisundaram (mparamas@iupui.edu)
Date: Tue Apr 06 2004 - 19:14:29 EDT

• Next message: Joel.Clarino@gxs.com: "don't know to change from CST to GMT display"
• Previous message: Andrew Hall: "serial port access solaris 8/9 x86"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have WD2500PB disk and AEC-7726Q SCS-IDE bridge
connected to Ultra 10 running Solaris 8 (Generic_108528-17)
with OBP 3.19

probe-scsi-all:
        can not find this particular drive
format:
        can not find this particular drive

I do not want to use on-board 24-bit IDE controller. I did boot -r.

Question:
What will resolve the problem? (Looks like firmware, OS and patch updates are
due).

FYI:
I have WD2500JB working fine via SCSI-IDE bridge on a Blade1500 running
Solaris 8 (Generic_108528-27) with OBP 4.9.5 (2003/09/15).

Thanks in advance.

Sundar
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Joel.Clarino@gxs.com: "don't know to change from CST to GMT display"
• Previous message: Andrew Hall: "serial port access solaris 8/9 x86"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:25 EDT