From: Johnson, Chad (cmjohnson@uslec.com)
Date: Tue Apr 06 2004 - 15:00:36 EDT
Hello all!
Here is my situation, frequently I have to replicate systems, using jumpstart
/ flash install, from one machine to another, not necesssarily the same class
box. The majority of the issues I have are quite simple driver issues, but
definatly cost me a lot of time.
My idea is this, when booting to a cd or network image into single user mode
the system which comes up detects the devices and loads the appropriate
drivers. I would like to do this same soft of thing on a newly restored
system. Essentially, restore the flash archive onto the disk, then run
'whatever' to detect and load the appropriate drivers.
Even if I cannot load the drives automatically, how could I tell what I need
to load so I can do it later?
TIA,
Chad Johnson
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:25 EDT