From: Donovan, Jeffrey (Jeff), ALABS (jmd@att.com)
Date: Tue Mar 23 2004 - 23:41:17 EST
SUMMARY
Thanks to Jim Vandevegt and Hichael Morton for responding. Took
Hichael's advice and checked the archives (should have done that first)
and found that I can go through the RSC port serial console to get to
the OK prompt. Jim said the same thing. Will try tomorrow.
Thanks for replying.
-----Original Message-----
From: Donovan, Jeffrey (Jeff), ALABS
Sent: Tuesday, March 23, 2004 7:33 PM
To: sunmanagers@sunmanagers.org
Subject: console port redirection on V480
Hi all,
We inherited (3) V480's and cannot get to an OK prompt off the ttya
port. We can put it in diag mode via the switch and get output but then
it just stops when diags is done. Our guess is that the previous owners
redirected console ouput to the RSC port. According to Sun doc you just
need to do this to redirect back to ttya port:
ok setenv input-device ttya
ok setenv output-device ttya
ok setenv diag-out-console false
ok reset-all
Question is, do you do this via the RSC port, because as far as we can
tell we cant get to an OK prompt via the ttya port.
Any help would be appreciated.
Thanks
Jeff Donovan
AT&T
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:20 EDT