From: Radhika Sambamurti (radhika_narendran@yahoo.com)
Date: Wed May 29 2002 - 12:10:28 EDT
Hi,
We are running Veritas volume manager 3.1
2 36 Gig disks were added and I have to enlarge an existing
volume. The question is;
The current volume is 18Gig and is called /oraback and is
concatenated.
Can I concatenate-mirror these two disks, and add a
concatenated-mirrored disk to the existing volume /oraback?
Are these the steps:
The steps are:
1. Format the drives using the format command
2. Initialize the disks - bring them under veritas
3. Use veritas volume manager to add the new disks
to the disk group oradg
4. [oraback is only concatenated - not striped] -
add 18G to oraback
The disk group is oradg, so will i just add a raw amount of
18G diskspace to the filesystem oraback?
any thoughts appreciated.
thx
Radhika
=====
It's all a matter of perspective. You can choose your view by choosing where to stand.
--Larry Wall
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:23 EDT