From: Steinhauer Juergen (gawith@gmx.de)
Date: Tue Mar 23 2004 - 05:39:26 EST
Hi guys,
Thanks all for the quick responses! It's really a great list!
The solution was to install the QLogic drivers (SUNWqlc & SUNWqlcx),
which I though should be installed automatically in a full
installation...
After the installation and a patch update everything is fine.
Thanks again,
JS
Subject: T3 not seen in Solaris 9
From: Steinhauer Juergen <gawith@gmx.de>
To: sunmanagers@sunmanagers.org
Content-Type: text/plain
Message-Id: <1079973614.731.22.camel@ginger.ip.de-ignite.net>
Mime-Version: 1.0
X-Mailer: Ximian Evolution 1.4.5
Date: Mon, 22 Mar 2004 17:40:14 +0100
Content-Transfer-Encoding: 7bit
Hi guys,
I have a V440, Solaris 12/03 Full Installation, with two T3s connected.
I can see the T3s in the OBP
/pci@1d,700000/SUNW,qlc@2
LiD HA LUN --- Port WWN --- ----- Disk description -----
1 1 0 50020f23000080e2 SUN T300 0118
1 1 1 50020f23000080e2 SUN T300 0118
/pci@1c,600000/SUNW,qlc@1
LiD HA LUN --- Port WWN --- ----- Disk description -----
1 1 0 50020f2300008247 SUN T300 0118
1 1 1 50020f2300008247 SUN T300 0118
,but unfortunately not in the OS.
I'm a little bit astonished, that I find neither any qlc entries in
/var/adm/messages, nor a qlc entry in /etc/system.
All the reconfig-commands (boot -r, drvconfig) have no effect.
Any help is welcome!
Regards,
JS
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:19 EDT