From: Russell, Shawn (GE Consumer & Industrial) (Shawn.Russell@GE.com)
Date: Mon Mar 15 2004 - 15:54:37 EST
Hello,
I have a SunFire 6800 that is connected to an EMC SAN via Emulex 9002.
We had a lun that was 8.4gb under Veritas Volume Manager 3.5. That lun
was removed from vxvm, deleted in the symmetrix, and represented as an
80gb lun. I did a devfsadm -Cv and then went into to autoconfigure the
drive and I get the error message: Auto configure failed. I am unable
to read the vtoc on the drive, it gives the following error message:
Unable to read Disk geometry. Is there anything I am missing or should
do differently?
Thanks,
Shawn Russell
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:16 EDT