From: S.A. Birl (sbirl+sunmanagers@concept.ocis.temple.edu)
Date: Thu Mar 04 2004 - 11:14:27 EST
Thanks to everyone who email me.
I should have been more specific in my original post. I know that the
eeprom has nothing to do with the failure to get a login prompt.
I was looking to reactive the 'help' command. Since 'power-off' returns a
'?', I was looking for other commands to power down the system. I was
trying recalling commands from my Ultra10 to try on the IPC.
Embarrassingly, I forgot all about 'boot -s'. I dont blow up my Ultra10
enough to go into single-user mode.
Options I was emailed:
* STOP-N while booting should reset the eeprom
(I say *should* because when I did it, the 'help' still doesnt help)
* Do "sys-unconfig" to make the system a blank system.
(Didnt do this, but I'll keep it in mind)
* If it's an old SunOS 4.x then look at /etc/rc.local and comment out the
offending lines, for Solaris look at the scripts under /etc/init.d/ and
/etc/rc?.d/ plus edit /etc/nsswitch.conf appropriately.
* NVRAM info @ http://www.squirrel.com/squirrel/sun-nvram-hostid.faq.html
* Check out http://www.sunhelp.org/
* Check out http://www.obsolyte.com/sun_ipc/
I have the root password and will blow away NIS.
And now that I have these websites to look at, I have some reading to do.
Thanks again!
As it was written on Mar 3, thus S.A. Birl typed:
Original post: Return-Path: <sunmanagers-bounces@sunmanagers.org>
Original post: Sender: sunmanagers-bounces@sunmanagers.org
Original post: Date: Wed, 3 Mar 2004 15:30:49 -0500 (EST)
Original post: From: S.A. Birl <sbirl@temple.edu>
Original post: To: sunmanagers@sunmanagers.org
Original post: Subject: Docs on SPARC station IPC
Original post:
Original post: Hello all:
Original post:
Original post: Recently acquired a Sparc IPC that used to be part of a NIS/YP
Original post: client-server environment.
Original post:
Original post: When I boot, the machine tries to constantly connect to the NIS server,
Original post: which no longer exists.
Original post:
Original post: Hitting ENTER/RETURN does not get me a login prompt.
Original post: STOP-A will get me the chevron (eeprom) but Im virtually helpless at that
Original post: point: help returns "There's no help for the weary"
Original post:
Original post: So my question is two-fold
Original post:
Original post: 1) How do I erase the eeprom?
Original post: I assume that a previous admin mucked with it.
Original post:
Original post: 2) How do I get a login prompt without having to format the disk?
Original post:
Original post:
Original post: And one last question:
Original post: Where can I find some good docs about a Sparc IPC?
Original post: docs.sun.com and Google werent much help.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:11 EDT