From: Adrian Phipps (AC) (PhippsAC@telkom.co.za)
Date: Mon Mar 01 2004 - 01:54:51 EST
Hi all,
I have a strange one here,
I have a Gigabit Ethernet card installed on my SUNFire 6800, the card
functions fine when the machine is up and running but once I reboot
the card does not respond at all, only after I have taken the cable
out and re-inserted it does the card respond? Anybody heard of
something like this? Or are there recommended ndd settings for this
kind of card. I have included the current settings and the
configuration on the switch side.
ndd -set /dev/ge instance 0
ndd -set /dev/ge adv_1000fdx_cap 1
ndd -set /dev/ge adv_1000hdx_cap 1
ndd -set /dev/ge adv_1000autoneg_cap 1
These settings above are located in a startup script in /etc/rc3.d
The switch is on auto speed and auto duplex.
regards
Adrian Phipps
========================================================================
This e-mail and its contents are subject to the Telkom SA Limited e-mail
legal notice available from mailto:legalnotice@telkom.co.za or
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:09 EDT