From: WC Jones (sx@insecurity.org)
Date: Wed Feb 11 2004 - 18:07:40 EST
What is the determing ifconfig setting to help match
the proper MTU for a PPPoE aDSL connection so that
my mail server TIMEOUT errors subside?
Running Solaris 9 Ultra 10
Current ifconfig is
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1492 index 2
inet 192.168.1.69 netmask ffffff00 broadcast 192.168.1.255
ether 8:0:20:a7:fc:f5
lo0: flags=2000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6> mtu 8252 index 1
inet6 ::1/128
hme0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
ether 8:0:20:a7:fc:f5
inet6 fe80::a00:20ff:fea7:fcf5/10
However I still get a lot of "TIMEOUT after" errors.
I will summarize.
Thx/Bill
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:02 EDT