From: Dave Landsiedel (Dave_Landsiedel@bobcat.com)
Date: Wed Feb 11 2004 - 12:33:34 EST
Top of the morning,
After a long night I was able to come to a conclusion and solution thanks
to
Shanker Durgad
Anand Chouthai
There were several others that replied with the same fix so thanks to you
all.
SunDoc 48586 Solaris 2.6 Patch 105181-33 may hang during a Reconfiguration
Boot
Solution was to boot cdrom -s and edit the /etc/system file add the
following entry:
set kobj_map_space_len=0x200000
Then boot the system. I had a few issues with DiskSuite and my mirrors
being out a sync
but was able to get past the configuring devices message. This was a work
around, the fix
is to load PATCH 105181-34.
I don't believe my problem stemmed from the GigaSwift Card or Drivers,
instead I believe we have never did a boot -r since we have loaded the OS
and patched.
I plan on trying to configure the GigaSwift card this Sat.
Thanks Again to all that have replied and helped me out.
Dave
I have listed the original post below.
>Hello,
>
>Have a SUN Ultra 250 that is running Solaris 2.6.
>Installed a GigaSwift Adapter card and drivers now the machine hangs
>on configuring devices. Is there anyway to get passed this on boot up.
>I have tried removing the card and doing another boot -r but still hangs.
>Is there any patches I should have loaded?
>Haven't found anything on Sunsolve or Google yet..
>
>Any thoughts?
_____________________________
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:02 EDT