From: Remy Zandwijk (remy.zandwijk@falw.vu.nl)
Date: Wed Feb 04 2004 - 07:23:12 EST
Managers,
I have an new V240 in which I installed a Quad Fast Ethernet interface
(tried both PCI 0 and PCI 1). When doing:
boot /pci@1d,700000/pci@1/SUNW,qfe@0,1
in the boot prom, it says:
Timeout waiting for ARP/RARP packet
The link light on the ethernet port is on and when trying the same
UTP cable on the bge0 interface, it just boots like a charm. The
cable is attached to a Cisco 3548 switch and I tried all the obvious
settings (100/full, 10/half, auto/auto. Fast port is enabled).
Why does the V240 not boot from the qfe interface?
Will summarize.
Remy Zandwijk
Free University Amsterdam
The Netherlands
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:58 EDT