From: Harald Husemann (harald.husemann@materna.de)
Date: Fri Jan 30 2004 - 12:01:21 EST
Hi gurus,
I have a strange problem here:
I can't get one of our V240's back to work, the serial console only
shows
debug:
Hm... I expected something like sc> or ok>, :-)
Every command I've tried is answered by "Corrected ECC Error", and then
the "debug:" reappears.
I tried exit, quit, reset -x, .#, even send a "BREAK" to it, without
success. The SC saw the "break", it answered
telnet> send brk
SC Alert: SC Request to send Break to host.
Corrected ECC Error
debug:
But that was it, no attempt to boot or go back to the OPB- or
ALOM-prompt.
Searched SUNManager's archive, google and docs.sun.com, but found no
hint...
Hope someone of you has an idea, since it's a productive machine, and I
have to get it back to work...
Could it be there's a hardware failure?? Maybe the memory is damaged??
Thanks, I hope someone has an idea,
Harald
-- ============================================ Harald Husemann Systems Engineer Teammanager Unix administration and Configuration Management Materna Gmbh - Vosskuhle 37 - D-44141 Dortmund, Germany Phone: +49-231-5599-8684 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:55 EDT