Multiple NIC cards, single IP address for redundancy

From: Sharona Miron (Sharona.Miron@emblaze.com)
Date: Tue Jan 27 2004 - 09:49:34 EST

• Next message: Jan De Luyck: ""break" when powering down wyse terminal"
• Previous message: Joseph Muscat: "E420 hangs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have SunFire V210 installed with OS Solaris 8 and with bge quad device
(/dev/bge) .
How I can config the bge0 & bge1 to work as redundancy with single ip address
.

note that each of those interfaces is already connecting to different Cisco
switchs.

Thanks.
Sharona Miron.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Jan De Luyck: ""break" when powering down wyse terminal"
• Previous message: Joseph Muscat: "E420 hangs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:54 EDT