Storedge 3310 to two hosts

From: Andrew Luande ALT (luandea@alt.co.ke)
Date: Mon Jan 26 2004 - 09:47:11 EST


Hi all,

 

I have a storedge 3310 and I want to connect it to two v240 sunfires. I
have two host cables. When I do the one host configuration my host can see
the disks well. When I do a two host configuration the machine either hungs
when it boots, or boots with scsi reset errors. I have done the cabling as
it says in the manual, host cables at the top and the scsi connector are the
bottom. This is for JOBD configuration. Can anyone tell me if I'm shooting
blanks or where I could be going wrong. A point in the right direction even
to some additional documentation that may help me would be highly
appreciated. Many thanks

 

Andrew
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:53 EDT