Solaris Hang After Copyright message

From: kengheng (kengheng@maxis.net.my)
Date: Wed May 22 2002 - 03:18:51 EDT


Hi,
    I have a Sun E3k that running Solaris 8, last few days, I restart the
server and it hang after the Copyright message, here are some console output
I able to capture from the terminal:
-------------start---------------------------------------------
{6} ok show-post-results

Slot 1 - Status=Okay, Type: I/O Type 4

Sysio0=P Sysio1=P FEPS=P FEPSFC=0 SOC=P
 Sbus0=P Sbus1=P Sbus2=P
    AC=P FHC=P SRAM=P FPROM=P LabCon=Not Ovtemp=Not
  TODC=P JTAG=P CntrPl=P DC=ff

Slot 3 - Status=Okay, Type: CPU/Memory

    Cpu0=P Cpu0-OK=P FailCode=0 Cpu1=P Cpu1-OK=P FailCode=0
      AC=P FHC=P SRAM=P FPROM=P LabCon=Not
Ovtemp=Not
   Bank0=0 Bank1=0 DTag0=P DTag1=P JTAG=P CntrPl=P
   Bank0=P Bank1=P DC=ff

Slot 16 - Status=Okay, Type: Clock

 Clock=P Serial=P KbdMse=P PPS-DC=P DCReg0=P DCReg1=P
    AC=P ACFan=P KeyFan=P PSFail=0 Ovtemp=Not TODC=P
  V5-P=P V12-P=P V5-Aux=P V5P-PC=P V12-PC=P V3-PC=P V5-PC=P
RckFan=P 3.3V=P 5.0V=P Triger=P Coolng=P AC-REV=P

P = Present or Passed
*** = Failed Component
Not = Not present

{7} ok boot -v
Resetting...

Software Power ON

@(#) Ultra Enterprise 3.2 Version 29 created 2001/06/18 17:28

CPU = 0000.0000.0000.0006
Probing keyboard Done

3,0>
3,0>@(#) POST 3.9.29 2001/06/18 17:50
3,1>
3,0>Copyright 2001 Sun Microsystems, Inc. All rights reserved.
3,1>@(#) POST 3.9.29 2001/06/18 17:50
3,0>
    SelfTest Initializing (Diag Level 10, ENV 00004001) IMPL 0011 MASK 90
3,1>Copyright 2001 Sun Microsystems, Inc. All rights reserved.
3,0>Board 3 CPU FPROM Test
3,1>
    SelfTest Initializing (Diag Level 10, ENV 00000000) IMPL 0011 MASK 90
3,0>Board 3 Basic CPU Test
3,0> Set CPU UPA Config and Init SDB Data
3,0> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0
3,0>Board 3 MMU Enable Test
3,0> DMMU Init
3,0> IMMU Init
3,0> Mapping Selftest Enabling MMUs
3,0>Board 3 Ecache Test
3,0> Ecache Probe
3,0> Ecache Tags
3,1>Board 3 CPU FPROM Test
3,1>Board 3 Basic CPU Test
3,1> Set CPU UPA Config and Init SDB Data
3,1> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6b3, MCAP = 0
3,1>Board 3 MMU Enable Test
3,1> DMMU Init
3,1> IMMU Init
3,1> Mapping Selftest Enabling MMUs
3,1>Board 3 Ecache Test
3,1> Ecache Probe
3,1> Ecache Tags
3,0> Ecache Quick Verify
3,1> Ecache Quick Verify
3,0> Ecache Init
3,1> Ecache Init
3,0> Ecache RAM
3,1> Ecache RAM
3,0> Ecache Address Line
3,0> Configure Ecache Limit
3,0>Ecache Size = 00400000, Limited to 00400000
3,0>Board 3 FPU Functional Test
3,0> FPU Enable
3,0>Board 3 Board Master Select Test
3,0> Selecting a Board Master
3,0>Board 3 FireHose Devices Test
3,1> Ecache Address Line
3,1> Configure Ecache Limit
3,1>Ecache Size = 00400000, Limited to 00400000
3,1>Board 3 FPU Functional Test
3,1> FPU Enable
3,1>Board 3 Board Master Select Test
3,1> Selecting a Board Master
3,0>Board 3 Address Controller Test
3,0> AC Initialization
3,0> AC DTAG Init
3,0>Board 3 Dual Tags Test
3,0> AC DTAG Init
3,0>Board 3 FireHose Controller Test
3,0> FHC Initialization
3,0>Board 3 JTAG Test
3,0> Verify System Board Scan Ring
3,0>Board 3 Centerplane Test
3,0> Centerplane Join
3,0>Setting JTAG Master
3,0>Clear JTAG Master
3,0>Board 3 Setup Cache Size Test
3,0> Setting Up Cache Size
3,0>Board 3 System Master Select Test
3,0> Setting System Master
3,0>POST Master Selected (JTAG,CENTRAL)
3,0>Board 16 Clock Board Test
3,0> Clock Board Initialization
3,0> Clock Board Temperature Check
3,0>Board 16 Clock Board Serial Ports Test
3,0>Board 16 NVRAM Devices Test
3,0> M48T59 (TOD) Init
3,0>Board 3 System Board Probe Test
3,0> Probing all CPU/Memory BDA
3,0> Probing System Boards
3,0> Probing CPU Module JTAG Rings
3,0>Setting System Clock Frequency
3,0> CPU Module mid 6 Checked in OK (speed code = 2)
3,0> CPU mid 7 Version=00170011.90000507
3,0> CPU Module mid 7 Checked in OK (speed code = 2)
3,0>System Frequency (MHz),fcpu=336, fmod=168, fsys=84, fgen=336
3,0>TESTING BOARD 1
3,0>Board 1 JTAG Test
3,0> Verify System Board Scan Ring
3,0>Board 1 Centerplane Test
3,0> Centerplane Check
3,0>Board 1 Address Controller Test
3,0> AC Initialization
3,0>Setting Freq to 25MHZ
3,0> AC DTAG Init
3,0>Board 1 FireHose Controller Test
3,0> FHC Initialization
3,0>Board 1 NVRAM Devices Test
3,0> M48T59 (TOD) Init
3,0>Re-mapping to Local Device Space
3,0>Begin Central Space Serial Port access
3,0>Enable AC Control Parity
3,0>Hotplug Trigger Test
3,0>Init Counters for Hotplug
3,0>Board 3 Cross Calls Test
3,0>Board 3 Environmental Probe Test
3,0> Environmental Probe
3,0>Checking Power Supply Configuration
3,0>Power is adequate, load 2 ps 1
3,0>Use existing memory configuraton
3,0>TESTING IO BOARD 1
3,0>Board 1 I/O FPROM Test
3,0>@(#) iPOST 3.4.29 2001/06/18 17:49
3,0> TESTING IO BOARD 1 ASICs
3,0> TESTING SysIO Port 0
3,0>Board 1 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 1 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 1 OnBoard IO Chipset (SOC) Test
3,0> TESTING SysIO Port 1
3,0>Board 1 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 1 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 1 OnBoard IO Chipset (FEPS) Test
3,0>IO BOARD 1 TESTED
3,0>Probing for Disk System boards
3,0>Board 3 System Interrupts Test
3,0>
3,0> System Board Status
3,0>-----------------------------------------------------------------
3,0> Slot Board Status Board Type Failures
3,0>-----------------------------------------------------------------
3,0> 0 | Not installed | |
3,0> 1 | Normal |+IO Type 4 |
3,0> 2 | Not installed | |
3,0> 3 | Normal | CPU/Memory |
3,0> 4 | Not installed | |
3,0> 5 | Not installed | |
3,0> 6 | Not installed | |
3,0> 7 | Not installed | |
3,0> 16 | Normal | Clock Board |
3,0>-----------------------------------------------------------------
3,0>
3,0> CPU Module Status
3,0>-----------------------------------------------------------------
3,0> MID OK Cache Speed Version
3,0>-----------------------------------------------------------------
3,0> 6 | y | 4096 | 400 | 00170011.90000507
3,0> 7 | y | 4096 | 400 | 00170011.90000507
3,0>-----------------------------------------------------------------
3,0>System Frequency (MHz),fcpu=336, fmod=168, fsys=84, fgen=336
3,0> Populated Memory Bank Status
3,0> bd # Size Address Way Status
3,0> 3 1024 0 2 Normal
3,0> 3 1024 1 2 Normal
3,0>
3,0>
        POST COMPLETE
3,0>Entering OBP

Switching to high addresses
Setting up TLBs Done
MMU ON
PC = 0000.01ff.f000.1cb8
PC = 0000.0000.0000.1d24
Decompressing into Memory Done
Size = 0000.0000.0006.d840
ttya initialized
Using POST's System Configuration
Setting up memory
Starting CPU ID 7
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom
sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@2,0 at 1,0 SUNW,qfe SUNW,qfe SUNW,qfe SUNW,qfe
Probing /sbus@2,0 at 2,0 nf
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
screen not found.
Using POST's System Configuration
Setting up memory
Starting CPU ID 7
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom
sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@2,0 at 1,0 SUNW,qfe SUNW,qfe SUNW,qfe SUNW,qfe
Probing /sbus@2,0 at 2,0 nf
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there

4-slot Sun Enterprise 3000, Keyboard Present
OpenBoot 3.2.29, 2048 MB memory installed, Serial #9699996.
Copyright 2001 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:94:2:9c, Host ID: 8094029c.

Rebooting with command: boot -v
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@0,0 File and args: -v
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.11 97/07/10 16:19:15.
Loading: /platform/SUNW,Ultra-Enterprise/ufsboot
Loading: /platform/sun4u/ufsboot
Size: 339096+90034+75930 Bytes
SunOS Release 5.8 Version Generic_108528-14 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 8:0:20:94:2:9c
mem = 2097152K (0x80000000)
avail mem = 2043617280
root nexus = 4-slot Sun Enterprise 3000
sbus0 at root: UPA 0x2 0x0 ...
sbus0 is /sbus@2,0
sbus1 at root: UPA 0x3 0x0 ...
sbus1 is /sbus@3,0
/sbus@3,0/SUNW,fas@3,8800000 (fas0):
        rev 2.2 FEPS chip
fas0 at sbus1: SBus1 slot 0x3 offset 0x8800000 and slot 0x3 offset 0x8810000
SBus level 3 sparc9 ipl 5
fas0 is /sbus@3,0/SUNW,fas@3,8800000
sd0 at fas0: target 0 lun 0
sd0 is /sbus@3,0/SUNW,fas@3,8800000/sd@0,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd1 at fas0: target 1 lun 0
sd1 is /sbus@3,0/SUNW,fas@3,8800000/sd@1,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd2 at fas0: target 2 lun 0
sd2 is /sbus@3,0/SUNW,fas@3,8800000/sd@2,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd3 at fas0: target 3 lun 0
sd3 is /sbus@3,0/SUNW,fas@3,8800000/sd@3,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd6 at fas0: target 6 lun 0
sd6 is /sbus@3,0/SUNW,fas@3,8800000/sd@6,0
sd9 at fas0: target a lun 0
sd9 is /sbus@3,0/SUNW,fas@3,8800000/sd@a,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd10 at fas0: target b lun 0
sd10 is /sbus@3,0/SUNW,fas@3,8800000/sd@b,0
        <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd11 at fas0: target c lun 0
sd11 is /sbus@3,0/SUNW,fas@3,8800000/sd@c,0
        <QUANTUM-ATLAS10K3_73_SCA-020K cyl 31014 alt 2 hd 8 sec 579>
root on /sbus@3,0/SUNW,fas@3,8800000/sd@0,0:a fstype ufs
fhc0 at root: UPA 0x6 0xf8800000
fhc0 is /fhc@6,f8800000
ac0 board 3 bank 0: base 0x0 size 1024mb rstate 2 ostate 1 condition 1
ac0 board 3 bank 1: base 0x40 size 1024mb rstate 2 ostate 1 condition 1
ac0 is /fhc@6,f8800000/ac@0,1000000
fhc1 at root: UPA 0x2 0xf8800000
fhc1 is /fhc@2,f8800000
ac1 is /fhc@2,f8800000/ac@0,1000000
central0 at root: UPA 0x1f 0x0 ...
fhc2 at root: UPA 0x0 0xf8800000
fhc2 is /central@1f,0/fhc@0,f8800000
sysctrl0 is /central@1f,0/fhc@0,f8800000/clock-board@0,900000
sysctrl0: Key switch is not in the secure position
environ0 is /fhc@6,f8800000/environment@0,400000
environ1 is /fhc@2,f8800000/environment@0,400000
simmstat0 is /fhc@6,f8800000/simm-status@0,600000
sram0 is /fhc@6,f8800000/sram@0,200000
zs0 is /central@1f,0/fhc@0,f8800000/zs@0,902000
zs1 is /central@1f,0/fhc@0,f8800000/zs@0,904000
cpu6: SUNW,UltraSPARC-II (upaid 6 impl 0x11 ver 0x90 clock 336 MHz)
cpu7: SUNW,UltraSPARC-II (upaid 7 impl 0x11 ver 0x90 clock 336 MHz)
-------------End---------------------------------------------

thanks,
khchan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:22 EDT