From: Ed Sanborn (esanborn@snowshore.com)
Date: Thu May 23 2002 - 11:10:26 EDT
RE: L1-A key for NetraX1Hi folks,
A "Control-Break" works for Hyperterminal.
-Ed
-----Original Message-----
From: Francisco Puente (CEA) [mailto:francisco.puente@cea.ericsson.se]
Sent: Thursday, May 23, 2002 10:05 AM
To: Ed Sanborn
Subject: RE: L1-A key for NetraX1
Hi, i think you cannot break down the system from Hiperterminal, you should
try TeraTerm, from wich you can send a "Control-Break" at ANY time, getting
the ok prompt!
I hope this help!
Francisco Puente
ERICSSON
Francisco Puente
Jambala Deployment Engineer
Network Integration Center
Compaqma Ericsson S.A.C.I.
* Av. Eduardo Madero 1020- Piso 17
C1106 ACX - Buenos Aires - ARGENTINA
* Phone + 54 11 4319-5676
* Fax + 54 11 4316-0996
* e-mail: mailto:francisco.puente@cea.ericsson.se
-----Original Message-----
From: Ed Sanborn [mailto:esanborn@snowshore.com]
Sent: Thursday, May 23, 2002 11:05 AM
To: sunmanagers@sunmanagers.org
Subject: L1-A key for NetraX1
Hi folks,
I have a PC with Hyperterminal hooked up to
my LOM console port on my NetraX1. When I apply
power the system begins to boot. I would like to
be able to break into the PROM monitor (the "OK"
prompt). Normally on a Sun keyboard you can hit
the L1-A keys. Any idea what the equivalent is
from Hyperterminal?
Thanks,
Ed
Ed Sanborn (978) 367-8478
Principal Network Administrator
SnowShore Networks
285 Billerica Rd.
Chelmsford, MA. 01824
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:22 EDT