From: Paul (pawos@excite.com)
Date: Mon Jan 12 2004 - 14:35:53 EST
Thanks all who responded. Sometimes it's a combination of replies that helps the best. Had a combination of things missconfigured including the netmask. And the plumb command and eri0 up worked to bring it up and all is good.
so check:
/etc/hostname.eri0
netmask
/etc/hosts
and ifconfig eri0 plumb
ifconfig eri0 up
Thanks all!
--- On Mon 01/12, Paul < pawos@excite.com > wrote:
From: Paul [mailto: pawos@excite.com]
To: sunmanagers@sunmanagers.org
Date: Mon, 12 Jan 2004 10:41:41 -0500 (EST)
Subject: getting solaris 9 to use eri0
What file do I have to hakc to get a solaris 9 system to use eri0 or the hostname and IP to use it? I have the hostname and IP configured but is not putting that information on the ethernet interface. I do ifconfig -a and it show the eri0 but the info is not in there. The way we ended up there is restoring from a similar system then changing all the info. And this is what we have left to change is to point all that info to eri0. Also tried a touch /reconfigure and no worky. Thanks.<br>The most personalized portal on the Web!<br>_______________________________________________<br>sunmanagers mailing list<br>sunmanagers@sunmanagers.org<br>http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7
: Wed Apr 09 2008 - 23:27:48 EDT
The most personalized portal on the Web!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers