From: Philip M Grisedale (pmg@anvil.com)
Date: Mon Jan 12 2004 - 08:46:36 EST
the fix
DIP SETTING DESCRIPTION
1 Up * Right Array 1 drive addresses 8-13 (default)
1 Down Right Array 1 drive addresses 0-5
2 Up Left Array 2 drive addresses 8-13
2 Down Left Array 2 drive addresses 0-5 (default)
3 Up Wait for start unit command
3 Down Use SW1-4 setting (default)
4 Up Delayed start 12 sec W drive id (default)
4 Down Start at power-on
5 Up/Down Reserved for future use (default is Down).
-Phil
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org]On Behalf Of Philip M
Grisedale
Sent: 12 January 2004 13:35
To: sunmanagers@sunmanagers.org
Subject: D1000 Setup, configuration options
Guru's
I am setting up a D1000 with 12 drives, you need to set the configuration
switch at the back for this. Can anyone give me some pointers, and yes Ive
looked at the users guides. Does anyone out there have working knowledge,
when it comes to setting these dip switches?. I just want to use my d1000
with 12 drives........
Any help would be great..
Thanks in advance
Phil
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:48 EDT