From: Linnabary, Paul (paul.linnabary@boeing.com)
Date: Tue Jan 06 2004 - 09:25:41 EST
I recently purchased two SunFire V250's recently and have been quite
annoyed by having to do a "tip hardwire" to a serial port on another
system to view the console. I also purchased the XVR-100 graphic
accelerator cards and installed them. I need to get these servers into
production as soon as possible. Could someone please provide the correct
procedure on how to change the console frame buffer for OBP so I will
have use of the color monitors? When I do a show-displays at the ok
prompt, I do see my installed graphics card as being:
/pci@1e,600000/SUNW,XVR-100@4. I will summarize. Thanks for the help!
Paul Linnabary
Boeing
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:46 EDT