From: Robert (rgoud@yahoo.com)
Date: Wed Dec 24 2003 - 13:48:56 EST
Hi list,
Is it possible to install D1000 on a 220R box, how do I find out whether it already has
a SCSI Raid Controller?. The following is the prtdiag output.
# ./prtdiag
System Configuration: Sun Microsystems sun4u Sun Enterprise 220R (2 X UltraSPARC-II 450MHz)
System clock frequency: 113 MHz
Memory size: 2048 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 450 4.0 US-II 10.0
0 2 2 450 4.0 US-II 10.0
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ---------------------------- --------------------
0 PCI 33 On-Board network-SUNW,hme
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 pcia slot 1 SUNW,hme-pci108e,1001 SUNW,qsi-cheerio
No failures found in System
===========================
Thanks in advance
Yahoo! Photos - Get your photo on the big screen in Times Square
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:44 EDT