metadevice problem after def. cable

From: Michael Schneider (lists@calispera.com)
Date: Mon Dec 15 2003 - 05:44:33 EST

• Next message: Sun Managers: "Changing permissions (mode) of a soft symlink"
• Previous message: KokHwa: "Solaris8 - configure multicast IP and Port"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Managers,
my Problem.. after a cable problem on my system the following status is
shown by metastat. The Disk is now ok (cable problem) but i can4t clear the
fault status ..

d6: Mirror
    Submirror 0: d60
      State: Needs maintenance
    Submirror 1: d70
      State: Needs maintenance
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 82803600 blocks

d60: Submirror of d6
    State: Needs maintenance
    Invoke: metareplace d6 c0t4d0s0 <new device>
    Size: 82803600 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c0t4d0s0 0 No Maintenance

d70: Submirror of d6
    State: Needs maintenance
    Invoke: after replacing "Maintenance" components:
                metareplace d6 c0t5d0s0 <new device>
    Size: 82803600 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c0t5d0s0 0 No Last Erred

--
Michael Schneider
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Sun Managers: "Changing permissions (mode) of a soft symlink"
• Previous message: KokHwa: "Solaris8 - configure multicast IP and Port"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:41 EDT