From: Paul Woscek (pawos@excite.com)
Date: Fri Dec 12 2003 - 12:49:34 EST
Thanks all, we didn't have the manuals, and this is what worked from the responses:
Here's what I did when I added my PGX64 card to my SunFire V120:
>From the console at the OK prompt you need to:
setenv input-device keyboard
setenv output-device screen
reset-all
Then it will come up on your VGA card.
The most personalized portal on the Web!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:41 EDT