From: Ray Pengelly (ray@biomed.queensu.ca)
Date: Fri Dec 12 2003 - 11:33:19 EST
I'm trying to install Solaris 9 x86 on a Tyan Thunder Ss2721ugn MB with an
IDE CDROM and 2 36GB u320 SCSI drives. This has the Adaptec 7902 u320
controller o it like the Sun V65x servers.
It loads the adpu320.bef driver and when I am asked where I want to install
from it shows the CDROM, NIC and the 2 SCSI drives. I have attempted to
install from both the CDROM and the Network but when I get past the system
identification portion of the install it craps out with the following:
No disks found
When its configuring /dev and /devices it states:
Warning: timeout on target 0 lun 0 initiating recovery
Warning: timeout on target 0 lun 0 initiating recovery
Warning: timeout on target 1 lun 0 initiating recovery
Warning: timeout on target 1 lun 0 initiating recovery
Warning: timeout on target 0 lun 0 initiating recovery
Warning: timeout on target 0 lun 0 initiating recovery
Warning: timeout on target 1 lun 0 initiating recovery
Warning: timeout on target 1 lun 0 initiating recovery
I have successfully installed to a spare 20Gb IDE hard drive. Anyone have
any idea what's going on? I've read a couple of snippets about problems with
ACPI and Solaris 9 x86 but I'm not sure how to resolve the problem.
Thanks for any help.
Ray
Ray Pengelly
Computing Support Technologist
Centre for Neuroscience Studies/
CIHR Group in Sensory-Motor Systems
Queen's University
Give a person a fish and you feed them for a day; teach that person to use
the Internet and they won't bother you for weeks.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:41 EDT