From: Dominic Clarke (dominicc@foe.co.uk)
Date: Thu Dec 11 2003 - 15:24:11 EST
Hi Sunmanagers
I inadvertantly switched of our A1000 array ( 12 * 18GB disks , attached to E420R , Solaris 7 , RaidManager 6.2.2 ) , and upon reboot of the machine ,
the 'format'
command only shows :
BLE DISK SELECTIONS:
0. c0t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,4000/scsi@3/sd@1,0
2. c2t0d0 <Symbios-StorEDGEA1000-0301 cyl 8615 alt 2 hd 64 sec 64>
/pseudo/rdnexus@2/rdriver@0,0
Whereas previously it would have shown a list of entries starting
c2t0d0
It just shows one. Here is the output from 'healthck -a'
chelus{root}3: healthck -a
Health Check Summary Information
www: Failed Module
chelus_001: Unable To Scan Module
healthck succeeded!
chelus{root}4:
Help !!
Dominic Clarke
www.foe.co.uk
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:40 EDT