From: Vinh Cao (vcao@telica.com)
Date: Wed Dec 10 2003 - 16:31:33 EST
---------------------------- Original Message ----------------------------
Subject: RE: Probe-scsi-all got error: bus fault?
From: "Vinh Cao" <vcao@telica.com>
Date: Wed, December 10, 2003 16:28
To: "Ungaro, Matt" <mjungaro@capitolindemnity.com>
Cc: sunmanagers@sunmanagers.org'
--------------------------------------------------------------------------
Matt,
Thank you. I try that and it works.
Vinh
<quote who="Ungaro, Matt">
> Hi Vinh,
> If you are not freshly booting into OBP (In other words, if you did a
> Stop-A or Halt while running Solaris) you will not be able to do a
probe-scsi-all. You must freshly boot into OBP, so do an init 6 on your
system, then while it is initializing memory, hit Stop-A, from that
point, you can do a probe-scsi-all. Make sure the OS does not load up at
all.
>
> Matt
>
> -----Original Message-----
> From: Vinh Cao [mailto:vcao@telica.com]
> Sent: Wednesday, December 10, 2003 2:50 PM
> To: 'sunmanagers@sunmanagers.org'
> Subject: Probe-scsi-all got error: bus fault?
>
>
> Hello manager users,
>
> I have a NetraT1 server running Solaris 8 (SunOS 5.8 Generic_108528-27
sun4u sparc SUNW,UltraAX-i2.) I need to add A1000
> disk array into it, but before that at OK prompt I try to do
> probe-scsi-all
> and got line after line:
>
> "Bus fault
> Bus fault"
>
> The server is sunning fine, if I don't do probe-scsi-all.
>
> Please send me email and I will summarize to the list.
>
> Thanks,
>
> Vinh
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
>
Vinh Cao
Unix Systems Admin
Phone: 508-804-8268
Cell: 508-479-5396
Vinh Cao
Unix Systems Admin
Phone: 508-804-8268
Cell: 508-479-5396
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:40 EDT