Disksuite Problem

From: David Price (dprice@plugnpay.com)
Date: Tue Dec 09 2003 - 16:34:37 EST

• Next message: Alan Bird: "Netra T1 100 & 105"
• Previous message: Paul Woscek: "Getting graphics card to work with Sunfire V120"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

System is a V120
Solaris 8
We recently used DiskSuite to Mirror the boot drive.
We are getting Read Errors on the boot drive so we are trying to replace it.
We can boot off the mirror but when we swap the primary drive and reboot it
won't get past the OK prompt.
I unfortunately don't have the exact error message for this problem.
Possible related, running metastat produces the results below. Only the
parts indicating an error are shown.

Going with the theory that I should tackle one problem at a time, can anyone
tell me how to repair the condition as shown below.

I am unsure as to which command I should run first. Should I simpel run
"metasync d32" as indicated ?

Thanks

Dave

d32: Mirror
    Submirror 0: d12
      State: Needs maintenance
    Submirror 1: d22
      State: Needs maintenance
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 4200606 blocks

d12: Submirror of d32
    State: Needs maintenance
    Invoke: after replacing "Maintenance" components:
                metareplace d32 c1t0d0s5 <new device>
    Size: 4200606 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c1t0d0s5 0 No Last Erred

d22: Submirror of d32
    State: Needs maintenance
    Invoke: metasync d32
    Size: 4200606 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c1t1d0s5 0 No Okay

d33: Mirror
    Submirror 0: d13
      State: Needs maintenance
    Submirror 1: d23
      State: Needs maintenance
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 6298020 blocks

d13: Submirror of d33
    State: Needs maintenance
    Invoke: after replacing "Maintenance" components:
                metareplace d33 c1t0d0s6 <new device>
    Size: 6298020 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c1t0d0s6 0 No Last Erred

d23: Submirror of d33
    State: Needs maintenance
    Invoke: metasync d33
    Size: 6298020 blocks
    Stripe 0:
        Device Start Block Dbase State Hot Spare
        c1t1d0s6 0 No Okay
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Alan Bird: "Netra T1 100 & 105"
• Previous message: Paul Woscek: "Getting graphics card to work with Sunfire V120"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:39 EDT