From: Robert Helmer (robert@roberthelmer.com)
Date: Mon Dec 08 2003 - 19:18:06 EST
Hello,
Thank you for all the responses, Chris Smith hit it directly
on the head by suggesting that I did not have "fixup protocol ftp" set
on the PIX for the non-standard port that the IIS server is running
on.
Thanks,
Rob Helmer
On Mon, Dec 08, 2003 at 03:29:01PM -0800, Robert Helmer wrote:
> Hello,
>
>
> I'm trying to connect to an IIS FTP server on a non-standard port
> from a Solaris 8 SPARC machine behind a Cisco PIX firewall.
>
> Passive mode does not seem to work at all, from any hosts I've tried.
> I tested from a Linux box at a seperate location, if I allow the
> IIS machine through the Linux box's firewall, then I can make an
> active FTP connection. So far so good.
>
> However, the Sun box has an internal IP address, whereas the Sun
> machine doesn't. So, when I run ftp in debug mode, I'm seeing :
>
> ---> PORT 10,10,10,2,184,66
> 500 Invalid PORT Command.
>
> Where the Sun box's IP is "10.10.10.2". I've tried using "quote" and
> scripting out the raw FTP commands, but it's a hassle. Is there a way
> to get FTP to lie about the PORT? Alternatively, any other way around
> this?
>
>
>
> Thanks,
> Rob
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:39 EDT