[SUMMARY] T3 Failover Cache Mode

From: SunLover (sunlover@gramajo.com)
Date: Thu Dec 04 2003 - 11:23:51 EST


Thank you to Kevin and Dustin.

According to the T3 service manual:

"In the auto cache mode, if the disk tray has full redundancy available,
then the caching mode is write-behind. If any component is nonredundant,
then the cache mode is set to write-through. Read caching is always
performed. This mode provides the best performance while retaining full
redundancy protection."
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:37 EDT