From: Chad Hendry (chendry@risstech.riss.net)
Date: Tue May 21 2002 - 15:12:22 EDT
We had a four port Belkin Omniview switch and our 220R worked fine with it.
We sent it to another site and replaced it with an existing 8 port Omniview
Pro. The 220R will not display on the switch and, in fact, the switch
does not detect the Sun's presence. Another location uses a 16 port version
of the same switch and it works fine with their 280R. We have a newer
Omniview Pro2. We stretched a cable down to it and it displays. In
addition the 4 port that worked with our 220R fails to work with the 280R at
the other location. At one location, two 280R's with identical hardware are
attached to the same switch. One works, one fails.
Does anyone have suggestions on configuring the video on the 220 and 280
systems to work with various switches and monitors?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:21 EDT