E#$@%@#$^%$ ---- boot server(new error v.2)

From: LAIN Lucas TECHTEL (llain@techtel.com.ar)
Date: Fri Nov 21 2003 - 13:32:36 EST


Hi ... i am getting tired about this boot server ...

this is my new error ... i googled a lot, but nothing happened ...

Thanks.
-----------------------------
Sun Netra X1 (UltraSPARC-IIe 400MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #50673620.
Ethernet address 0:3:ba:5:37:d4, Host ID: 830537d4.

Executing last command: boot net -v install
Boot device: /pci@1f,0/ethernet@c File and args: -v install
2aa00 Using RARP/BOOTPARAMS...
Internet address is: 192.168.200.133
hostname: mta04.techtelnet.net
Found 192.168.200.110 @ 8:0:20:e9:18:b1
root server: sun1 (192.168.200.110)
root directory: /jumpstart/install/Solaris_8/Tools/Boot
Size: 336312+89602+75558 Bytes
SunOS Release 5.8 Version Generic_108528-07 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 0:3:ba:5:37:d4
Using default device instance data
mem = 524288K (0x20000000)
avail mem = 509804544
root nexus = Sun Netra X1 (UltraSPARC-IIe 400MHz)
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: ethernet@c, dmfe0
dmfe0 is /pci@1f,0/ethernet@c
PCI-device: ethernet@5, dmfe1
dmfe1 is /pci@1f,0/ethernet@5
Requesting Internet address for 0:3:ba:5:37:d4
NOTICE: dmfe0: PHY 1 link up 100 Mbps Full-Duplex
NOTICE: dmfe1: PHY 1 link up 100 Mbps Full-Duplex
Found my IP address: c0a8c885 (192.168.200.133)
hostname: mta04.techtelnet.net
whoami: no domain name
root on sun1:/jumpstart/install/Solaris_8/Tools/Boot fstype nfsdyn
PCI-device: isa@7, ebus0
su0 at ebus0: offset 0,3f8
su0 is /pci@1f,0/isa@7/serial@0,3f8
su1 at ebus0: offset 0,2e8
su1 is /pci@1f,0/isa@7/serial@0,2e8
cpu0: SUNW,UltraSPARC-IIe (upaid 0 impl 0x13 ver 0x14 clock 400 MHz)
Configuring /dev and /devices
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
PCI-device: ide@d, uata0
uata0 is /pci@1f,0/ide@d
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
PCI-device: usb@a, ohci0
ohci0 is /pci@1f,0/usb@a
pseudo-device: lockstat0
lockstat0 is /pseudo/lockstat@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
power0 at ebus0: offset 0,2000
power0 is /pci@1f,0/isa@7/power@0,2000
dad0 at pci10b9,52290 target 0 lun 0
dad0 is /pci@1f,0/ide@d/dad@0,0
        <ST320413A cyl 38790 alt 2 hd 16 sec 63>
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
isadma0 at ebus0: offset 0,0
Using RPC Bootparams for network configuration information.
Skipping interface dmfe1
Configured interface dmfe0

ERROR: The product distribution does not contain
       a product table of contents

Type: nfs, Path: 192.168.200.110:/jumpstart/install/Solaris_8
bootparams entries:
install entry: 192.168.200.110 192.168.200.110 /jumpstart/install/Solaris_8
root entry: sun1 192.168.200.110 /jumpstart/install/Solaris_8/Tools/Boot

----------------------------------------------------------

--
Lucas Lain
Gerencia de Ingenierma
TechTel Telecomunicaciones
llain@techtel.com.ar
TE. (54-11) 4000-3164
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:32 EDT