From: Tobias Koch (tobias.koch@postbank.de)
Date: Tue Nov 18 2003 - 08:02:17 EST
Dear Sun Managers,
i've got a problem with a Sun E4500 running Solaris 9 (5.9 Generic_112233-08
sun4u sparc SUNW,Ultra-Enterprise)
The System ist attached to a EMC-Symmetrix via JNI SBUS Adapters (FC64-1063).
Now i try to connect the LUNs via MPXIO, so i enbaled it under
/kernel/drv/scsi_vhci.conf,
but a reboot doesn't enbaled it. I don't see the virtual Controller, I see all
LUNs over to ways:
# format:
4. c8t3d0 <EMC-SYMMETRIX-5266 cyl 18410 alt 2 hd 15 sec 64> emcvol01
/sbus@7,0/fcaw@0,0/sd@3,0
14. c9t4d0 <EMC-SYMMETRIX-5266 cyl 18410 alt 2 hd 15 sec 64> emcvol01
/sbus@3,0/fcaw@0,0/sd@4,0
The newest Driver is installed:
pkginfo -l JNIfcaw
PKGINST: JNIfcaw
NAME: JNI Fibre Channel SCSI/IP HBA Driver
CATEGORY: system,scsi
ARCH: sparc
VERSION: 2.6.13, Feb 26, 2003
VENDOR: JNI Corp.
PSTAMP: JNIC,HBA
INSTDATE: Oct 31 2003 10:45
STATUS: completely installed
Does MPXIO works with JNI or what do i have to preconceive?
Thanks,
Greets Tobias Koch
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:30 EDT