From: Brian (mtkann@thekann.com)
Date: Tue Nov 04 2003 - 23:35:57 EST
Due to overwhelming response that there was not enough info...here is round
2:
I would like to force all outbound to the virtual interface (hme0:1). This
interface floats between servers using cluster server. The reason I need to
do this is because of firewall issues...i know you can specify a route to
one (or many) specific hosts...and that works, but there are WAY too many
hosts and they change often
The IP info:
(static) hme0: 165.251.xxx.22
(float) hme0:1 165.251.xxx.21
Netmask: 255.255.255.128
Gateway: 165.251.xxx.126 (default route)
Currently all of the traffic is going out of hme0, and I need it all to go
out of hme0:1
Things I have tried so far:
1. ifconfig hme0 165.251.xxx.22 deprecated
2. ifconfig hme0 metric 1
3. Set the mask of hme0 to 255.255.255.255
3. An endless amount of route stuff...all seemed to get me nowhere
Thanks all
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Brian
Sent: Tuesday, November 04, 2003 6:06 PM
To: sunmanagers@sunmanagers.org
Subject: routing question
All,
My head is spinning, and i need some help with this...here it is:
I have a virtual IP and the regular IP (hme0 and hme0:1). How do i force
all outbound traffic over the virtual IP?
note...these are on the same mask 255.255.255.128
solaris 8.
thanks!
-B
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:25 EDT