Blind Video Reset on U2 Creator using 13w3 Adapter

From: Terry Shores (orcldba@yahoo.com)
Date: Thu Oct 30 2003 - 13:23:33 EST

• Next message: Joseph Asare-Kwakye: "SMC Launch Errors"
• Previous message: Samael_pan: "How do I reset Timeout waiting for ARP/RARP packet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm trying to reset the output on several Ultra 2 Creator's using a 13w3-SVGA adapter to 1024x768x60 and continually get the "Resolution Outiside of Scan Frequency" message. I can use my U60 set to 1024x768x60 and x75 using the same adapter and monitor so I know the adapter and monitor are OK.
 
Since I can't see what's going on on the U2's I'm waiting for the disks to boot after a power up, issueing the "Stop-A", waiting 30-45 seconds, then "setenv output-device screen:r1024x768x60" and "Enter", then "reset" and "Enter", then "boot" and "Enter".
The systems boot but I still have no output.
What am I doing wrong?
 
Thanks in advance,
Terry
Exclusive Video Premiere - Britney Spears
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Joseph Asare-Kwakye: "SMC Launch Errors"
• Previous message: Samael_pan: "How do I reset Timeout waiting for ARP/RARP packet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:23 EDT