From: Tony Magtalas (ttk67@yahoo.com)
Date: Tue Oct 28 2003 - 21:56:58 EST
Hello Managers,
I just bought a Seagate Baracuda ATA IV Model
ST340016A
40 GB disk drive with a Sun barcode (PN 370-4419-03)
and trying to add it to my Ultra 10 workstation.
OBP=3.25, running Solaris 2.9
It is being used as a (2nd) slave disk.
When the system boots up, it sees the 2nd drive as
ST340016A, however the total capacity is only 6.8 GB
Does anybody know how to make this disk use the entire
40 GB disk? I've noticed while running format, it sees
it as ST34016A, # of cylinder is 12007, alt 2 hd 16
sector 63.
However when I looked at the Seagate website it says
the # of cylinder is 1023, Head=256, Sector 63
This is a Sun disk, PN 370-4419-03. Is there a problem
with the Sun formatter (I am unable to reformat this
disk in an Ultra 10). Any feedback would be greately
appreciated.
Thanks,
Tony
PS: I was able to make it into a 32.5 GB drive by
jumpering the 4th pin, and use the command:
# dd if=/dev/zero bs=1b count=16 of=/dev/rdsk/c0t1d0s2
and newfs it. But this is a 40 GB disk drive. I still
haven't figured out how to make it into a 40 GB drive yet.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:22 EDT