From: synrat (synrat@wirewalk.org)
Date: Fri Oct 24 2003 - 14:44:43 EDT
Configuring 3510 fc with v480.
I can't get the wwn number for qlogic adapter.
When I run luxadm probe I only get the listing
of 2 internal disks, but no mention of the fiber adapter that's installed.
I suppose I need that to allow access from the adapter to the array ??!!
The card is in OK state when doing prtdiag.
bash-2.05# luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:200000008713c252 Device Type:Disk device
Logical Path:/dev/rdsk/c1t1d0s2
Node WWN:2000000087144874 Device Type:Disk device
Logical Path:/dev/rdsk/c1t0d0s2
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:21 EDT