From: Dave Warchol (Warchol@harthosp.org)
Date: Wed Oct 22 2003 - 09:10:47 EDT
Hello:
After some recent Solaris 9 installs, I've noticed that the
instance number(s) on HBA's sometime's change (lpfc0 becomes lpfc1,
etc.). I haven't done enough installs/upgrades to know if this is a
function of:
- Solaris 9,
- booting with reconfigure, or,
- installing a new version of the driver. [These boxes are attached to
EMC CLARiiON CX600(s).] It is a pain because other configuration files
use the device name/instance number. It would also be nice to be
consistent across all boxes (if one HBA: it is always lpfc0, if two:
lpfc0 and lpfc1). I think that the process would be to modify
path_to_inst (delete the lpfc entries?) when this situation crops up.
If anyone has a (safe) procedure/comments for doing so or a different
approach, I'd very happy to summarize.
Thanks
Dave
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:20 EDT