From: Andrew Luande (luandea@alt.co.ke)
Date: Tue Oct 21 2003 - 12:04:06 EDT
Thank for all the replies i have recieved so far. I found that i was
cabling the array wrongly. Once I corrected the cable problem. Some the
errors like
WARNING: /pci@1c,600000/scsi@2,1 (glm1):
SCSI bus DATA IN phase parity error
go away, but i still get alot of
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
WARNING: add_spec: No major number for mpt
when booting. I was advised to do a reboot -- -r to reconfigure but that
didnt work. Also i am now unable to seee my tape drive in /dev/rmt. I
have
downloaded the scsi adaptor driver, install the latest sun solaris 8
cluster
patch. I at some point could see the disks when i did a format. Can
anyone
help.
>
> Andrew
>
>
>
>
> ----- Original Message -----
> From: "Jeremy Loukinas" <sunadmin@fuse.net>
> To: "Andrew Luande" <luandea@alt.co.ke>
> Sent: Tuesday, October 21, 2003 6:26 PM
> Subject: Re: SCSI Errors when booting Sun
>
>
> > What kind of Server are you connecting this guy to?
> >
> > What kind of adapter?
> >
> > Jeremy
> > >
> > > From: "Andrew Luande" <luandea@alt.co.ke>
> > > Date: 2003/10/20 Mon AM 09:41:49 EDT
> > > To: <sunmanagers@sunmanagers.org>
> > > Subject: SCSI Errors when booting Sun
> > >
> > > Hi,
> > >
> > > I have installed a sun storedge array (3310). I did a probe-scsi-all
> and i
> > > could see the disks and the processor. I dont have a controller card
in
> it so
> > > i will use it in JBOD mode. When i boot up the server i get these
> errors.
> > > When i do a format command i am able to see the disks but the warnings
> make me
> > > uncomfortable. Can anyone
> > > help.
> > >
> > > Rebooting with command: boot
> > > Boot device: disk File and args:
> > > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > > FCode UFS Reader 1.11 97/07/10 16:19:15.
> > > Loading: /platform/SUNW,Sun-Fire-V240/ufsboot
> > > Loading: /platform/sun4u/ufsboot
> > > SunOS Release 5.8 Version Generic_108528-24 64-bit
> > > Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: add_spec: No major number for mpt
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Connected command timeout for Target 0.0
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 0 reducing sync. transfer rate
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > got SCSI bus reset
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Connected command timeout for Target 0.0
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 0 reverting to async. mode
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > got SCSI bus reset
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Connected command timeout for Target 1.0
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 1 reducing sync. transfer rate
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > got SCSI bus reset
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Connected command timeout for Target 1.0
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 1 reverting to async. mode
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > got SCSI bus reset
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 2 reducing sync. transfer rate
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 2 reverting to async. mode
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 3 reducing sync. transfer rate
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 3 reverting to async. mode
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 4 reducing sync. transfer rate
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > SCSI bus DATA IN phase parity error
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Resetting scsi bus, got incorrect phase from (4,0)
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > Target 4 reverting to async. mode
> > > WARNING: /pci@1c,600000/scsi@2,1 (glm1):
> > > got SCSI bus reset
> > > _______________________________________________
> > > sunmanagers mailing list
> > > sunmanagers@sunmanagers.org
> > > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:20 EDT