legato networker and M1500 tape library

From: Raj Mendu (rmendu@linkshare.com)
Date: Fri May 17 2002 - 08:43:48 EDT


Hi

My legato networker 6.1.1 on an ultra5 (solaris 8) is seeing the wrong
jukebox! probe-scsi-all as well as /etc/LGTOuscsi/inquire report

scsidev@1.0.0:M4 DATA MagFile 2.04|Autochanger (Jukebox)
scsidev@1.1.0:QUANTUM DLT8000 0239|Tape, /dev/rmt/0cbn
scsidev@1.2.0:QUANTUM DLT8000 0239|Tape, /dev/rmt/1cbn

instead of ATL M1500 for the jukebox!

I'm using LSIlogic ITI6100U2-VS HBA for lvd devices.

this is the config in the "itsps" driver file

# itsps.conf for Solaris 2.6 and newer. Read the man
# pages for driver.conf(4), pci(4), scsi(4) for more details.
#
# global definitions, default is marked with *
#
# symFlags - This is a bit-mask that can be used to enable or disable
# driver properties:
# bit 0 - When set, the driver will not reset the SCSI bus at
initialization.
# Certain cd-rom, tape, and other devices will not work
properly when
# this bit is set. The default state for this bit is cleared.

# bit 1 - When set, the driver will not export the DMI ioctl
interface. Only
# set this bit if you want to disable the ioctl interface for
security
# reasons. The default state for this bit is cleared.
# bit 2 - When set, the driver will disable 64-bit addressing
capability.
# When clear, the driver enables 64-bit addressing
capability. The
# default state for this bit is cleared.
#
# scsi-options - This will change the options for all devices which
don't have
# an override via the target<n>-scsi-options. See the SCSI_OPTIONS_xx
# bit definitions in /usr/include/sys/scsi/conf/autoconf.h.
#
# target<n>-scsi-options - (n=0..f) This is the same as scsi-options but
only
# affects the given target ID.
#
# scsi-initiator-id=n - (n=0..f) This setting will change the host
adapter SCSI
# ID to 'n'.

symFlags=0x0
scsi-options=0xfe8
#target0-scsi-options=0x7e8
#scsi-initiator-id=7

**

the target0-scsi-options is commented out. may be this needs to be
modified
if so, what is the correct entry? (i tried a boot -r by uncommenting and
it
didn't work!). Any help would be greatly appreciated..

TIA and I will summarize

--
Raj Mendu
Manager of Systems Operations
Linkshare Corporation
215 Park Ave S., 8th Floor, New York, NY 10003
(646)-654-6000 x356 (T)
(646)-602-0160 (F)
rmendu@linkshare.com
--
Register for free today and join over 600 of the most successful
affiliate programs on the Web:
http://www.linkshare.com/join
Confidential Information (C) Copyright 1999-2001, LinkShare Corporation
This message is intended only for the use of the Addressee and may
contain
information that is PRIVILEGED and CONFIDENTIAL. If you are not the
intended
recipient, dissemination of this communication is prohibited. If you
have
received this communication in error, please erase all copies of the
message
and its attachments and notify us immediately
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:20 EDT