From: Mark Reis (mcr2z@cs.virginia.edu)
Date: Fri Oct 17 2003 - 12:46:03 EDT
Hello,
My question is - How do I set up jumpstart so that it will install through
to completion with a fully headless Sun box where my only access is through
a console cable? Is there a good FAQ out there?
While working with updating our jumpstart script for Solaris 9, I noticed
that part of the install process is in X. We have about 30 Solaris boxes set
up in this manner, so I don't really want to cart around a keyboard, monitor
and mouse for each install.
Through the X-Menu asks me to set the following options:
1) Default Route
2) Power Management
Part 1 is handled by a finish script right now, but how can I get the prompt
to go away. Anyone know what option I can set for two to make it go away?
I'm hoping that there is a solution aside from setting up one profile for
each machine.
When the machine reboots, it asks me to confirm:
1) Locale
2) Kerberos
I've experimented with setting options for part 1 in my sysidcfg to en_US
and en.US.ISO88590-1 , but I still see the prompt. Part 2 I thought was
handled by the option "security_policy=NONE". Does anyone have an idea why
I'm still seeing these last two prompts?
Sincerely,
Mark R.
Sysidcfg:
system_locale=en_US.ISO8859-1
timezone=US/Eastern
timeserver=10.10.10.5
terminal=vt102
name_service=NIS {domain_name=myyp name_server=myypserv(10.10.10.23)}
network_interface=PRIMARY {protocol_ipv6=no}
root_password=mypassencrypted
security_policy=NONE
Test Machine:
Ultra 10, 300Mhz, 1GB RAM, with the current OBP.
Install Command:
<stop a> boot net -v install
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:19 EDT