From: Greg Ulyatt (greg.ulyatt@red.net)
Date: Fri Oct 17 2003 - 09:20:24 EDT
I recently was given an A5000 with 2 FC100/S cards. I have tried these
cards on an E5000, E3000 and Ultra2E (all sbus). However, whatever
I do and whatever configuration I use, I can never see the A5000!
In fact, going through the A5k troubleshooting, it mentions loop
debugging. So, I tried that - as soon as a card is connected via fiber
the loop count drops to 0 (on a full loop). I've disconnected the
front and back planes - still 0 count, but when I kill the gbics, then
I get a count again.
So far, i've tried this with both FC100/s cards, multiple gbics, and
even
a JNI FC64 card I happened to have (That one partially works. I get no
devices in /dev/es, but it recognizes 7 of the 14 disks!)
I'm running Sol8, fully patched up on all systems.
Help, please! this is driving me insane!!!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:18 EDT