From: wee_khiang TAY (wee_khiang@hotmail.com)
Date: Fri Oct 17 2003 - 01:12:46 EDT
Hi,
I have a SF280R with solaris8 installed connected to a Storedge3310 SCSI
array using dual bus configuration. I have only 4 hdds which i need to
perform a Raid0 mirror. As the firmware config only allows Raid0 to used
more than 1 hdd, the only solution i could do is to make 2 logical drives
with 2 hdd each and then partitioned both logical drive into 2 each and this
gives me back 4 hdd with Raid0.
Is this correct coz i want to mirror disk1 with disk2, mirror disk3 with
disk4 ?
The file /kernel/drv/sd.conf has been edited to read the 4 new LUNs created
and format command shows all 4 new disks are visible.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000004cffb7ebc,0
1. c3t0d0 <SUN-StorEdge3310-0325 cyl 34474 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@0,0
2. c3t0d1 <SUN-StorEdge3310-0325 cyl 34474 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@0,1
3. c3t0d2 <SUN-StorEdge3310-0325 cyl 34474 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@0,2
4. c3t0d3 <SUN-StorEdge3310-0325 cyl 34474 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@0,3
Solstic Disksuite software has been installed on the SF280 and from the GUI
i am able to see both controllers with all disks attached.
Mount command shows the 4 new disks are not mounted and /etc/vfstab has not
been edited to mount the 4 disk at boottime.
How do i actually perform a mirroring between the 4 disks?
Thanks in advance.
_________________________________________________________________
Keep track of Singapore & Malaysia stock prices.
http://www.msn.com.sg/money/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:18 EDT