From: Ilya Birman (ilya.birman@abnamro.com)
Date: Thu Oct 09 2003 - 13:24:59 EDT
Interesting issue with ALL of my RSC boards.
I have about 20 sun-fire server with configured RSC boards in 3
different location. All of the sudden I could not telnet in ALL the
cards. The cards would respond to rscadmin command from host but I was
not able to telnet into ANY of the cards.
After reset them with resetrsc command I was able to get back into all
but 2 RSC cards. I get an error rscadm: RSC firmware not responding
So I can not do anythign with those 2 cards at all.Any ideas. WILL
SUMMARIZE. Thanks
---------------------------------------------------------------------------
This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change.
ABN AMRO Bank N.V. (including its group companies) shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. ABN AMRO Bank N.V. (or its group companies) does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference.
---------------------------------------------------------------------------
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:16 EDT