I wish to 'rename' /dev/rmt/1 to /dev/rmt/0

From: Dominic Clarke (dominicc@foe.co.uk)
Date: Wed Oct 08 2003 - 09:01:36 EDT

• Next message: Griffor, Bob (COMFIN, VFS, IT Contractor): "Getting a TARball to tape."
• Previous message: Sugan Moodley: "Repost: OFFICAL SUMMARY: EMC Storage attached to Solaris 9 on SF12k]"
• In reply to: Sugan Moodley: "Repost: OFFICAL SUMMARY: EMC Storage attached to Solaris 9 on SF12k]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Sunmanagers

I am running Veritas Netbackup DataCenter 4.5 on an E250 , Solaris 8.

Initially this machine had just a singe SDLT L8 tape drive attached , known as
/dev/rmt/0* , and I had configured VNB to find and use this tape drive.

However , I have now added a DLT7000 tape drive to the machine , when I did 'boot -r' after adding this , the DLT7000 became /dev/rmt/0 , and the
SDLT L8 became /dev/rmt/1.

I have now succeeded in changing the DLT7000 to use /dev/rmt/2 , however how can I get the SDLT drive back to using /dev/rmt/0

Thanks in advance , I will summarise

Dominic Clarke

Friends of The Earth Ltd.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Griffor, Bob (COMFIN, VFS, IT Contractor): "Getting a TARball to tape."
• Previous message: Sugan Moodley: "Repost: OFFICAL SUMMARY: EMC Storage attached to Solaris 9 on SF12k]"
• In reply to: Sugan Moodley: "Repost: OFFICAL SUMMARY: EMC Storage attached to Solaris 9 on SF12k]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:15 EDT