From: John Lee (thesunlover2002@yahoo.com)
Date: Thu May 16 2002 - 14:28:30 EDT
Hi Sun Managers,
>From my last question about ndd, I got two
enlightening answers:
1) "ndd -set /dev/qfe adv_autoneg_cap 0" will
reinitialize the interface. Your interface will
probably go offline for 3~4 seconds when it does so.
(Darren Dunham)
2) "ndd -set /dev/qfe adv_autoneg_cap 0" actually
forces the interface to reset its speed. (Martin
Hepworth)
Here is my new question:
Will "ndd -set /dev/qfe adv_autoneg_cap 1" ignore the
other ndd commands running before it?
For example:
# ndd -set /dev/qfe instance 3
# ndd -set /dev/qfe adv_100fdx_cap 1
# ndd -set /dev/qfe adv_100hdx_cap 1
# ndd -set /dev/qfe adv_10fdx_cap 1
# ndd -set /dev/qfe adv_10hdx_cap 1
# ndd -set /dev/qfe adv_autoneg_cap 1
Will the last command " ndd -set /dev/qfe
adv_autoneg_cap 1" ignore all the previous ndd
commands? Will the last command " ndd -set /dev/qfe
adv_autoneg_cap 1" just go to communicate with the hub
connecting to the qfe port 3 and set the proper
parameters based on the communication with the hub?
(Sorry I don't have a spare system to test this
question).
Thank you again!
John Lee
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:20 EDT